Fuji Spray Products
Fuji D6™ 6-Stage HVLP Spray System with T-70 Spray Gun
(No reviews yet)
Write a Review
- SKU:
- 4006-T70
- MPN:
- 4006-T70
- Condition:
- New
- Availability:
- Usually Ships the same day.
- Weight:
- 47.00 LBS
- Width:
- 18.00 (in)
- Height:
- 15.00 (in)
- Depth:
- 15.00 (in)
Frequently bought together:
Description
In the bathtub, tile, and countertop refinishing world, everyone talks about Low-VOC coatings—often high-solids formulas that can be extremely viscous (think “thick” material that still needs to atomize clean). Here’s the problem: many techs try to spray these coatings with a 2–3 stage turbine. When the turbine can’t atomize the material, the common “solution” becomes over-reducing.
Translation: A coating designed to be lower VOC can become a high-VOC mess when you dump in too much reducer just to make it spray. You lose build, performance, and the finish can suffer—plus you’ve defeated the purpose of the coating.
The Fuji D6™ makes sense because it brings the pressure and airflow needed to atomize higher-viscosity coatings with minimal thinning required—so you can keep the system’s performance intact and keep your workflow under control.
Translation: A coating designed to be lower VOC can become a high-VOC mess when you dump in too much reducer just to make it spray. You lose build, performance, and the finish can suffer—plus you’ve defeated the purpose of the coating.
The Fuji D6™ makes sense because it brings the pressure and airflow needed to atomize higher-viscosity coatings with minimal thinning required—so you can keep the system’s performance intact and keep your workflow under control.
D6™ 6-Stage HVLP Spray System — 11.5 PSI
Efficient • Cooler Operation • Built for Longevity & ROI
What the D6 Delivers
The D6 consistently provides warm, dry air to help atomize even high-viscosity coatings with virtually no thinning required. That means better coverage, reduced overspray, and more predictable results.
Built for the field: rugged design for shop or job site use—made to take a beating and keep producing.
Smart Select PSI Control
Dial in output with 6 pre-set pressure settings ranging from 3 PSI (1-stage) up to 11.5 PSI (6-stage). This gives you control over atomization, material delivery, and finish quality.
Pro move: Use only the power you need—maximize finish quality while minimizing overspray and waste.
Key Features
- Powerful 6-stage motor rated at 11.5 PSI
- Smart Select Control Panel (3 PSI to 11.5 PSI settings)
- Easy Pause remote control (up to 75 ft range)
- Advanced 2-stage turbo filtration + check filter light
- Heat Dissipation Technology for cooler operation
- Noise reduction case design
- Fold-away spray gun holder
- 30 ft hose + quick-connect + air control valve
Quick Specs (D6 System)
Coating Compatibility + Warranty
- Ideal for high-viscosity materials
- Suitable for waterborne and solvent-based coatings
- 2 + 1 year warranty on parts and labor
ROI mindset: less thinning, less waste, better coverage, and longer motor life add up fast.
Choose Your HVLP Turbine Spray Gun
T70™ • T75G™ • G-XPC™
Non-bleed stainless steel needle, nozzle, and fluid passages • Side-mounted fan pattern control — incremental adjustment with 3 orientations (horizontal / vertical / circular) • Easy disassembly with minimal internal components • Cup capacity options from 3 oz (89 cc) to 1 qt (1000 cc)
6 FOR 6 — Bonus Accessories
Extra value built into the system.
- 1.8mm air cap set
- 6 ft flexible whip hose
- Replacement filter pack
- 19-piece spray gun cleaning kit
- Wet film gauge
- “Always Measure” booklet
Fuji Spray isn’t just setting standards; they’re redefining them with the D6, a true powerhouse in spray finishing. This system boasts a commanding 6-stage turbine generating a robust 11.5 PSI, engineered for cooler, more efficient operation that translates to extended motor life and a rock-solid return on your investment. Take absolute command of your finish with six pre-set pressure settings—pinpoint control over spray output for flawless, professional-grade results with minimal overspray and waste. The D6’s consistently warm, dry air atomizes even thick, high-viscosity coatings with little to no thinning required, achieving smooth and even coverage. Proudly designed and assembled in Canada with a rugged, job-site-ready build, the D6 is made for unmatched longevity in the shop or in the field.
EAH — The Spray Equipment Authority
Buying a turbine is one thing. Keeping it working on the job site is another. EAH supports professional sprayers with real-world experience—helping you match coating viscosity, tip sizes, and turbine stage power so you spray clean without destroying your coating system.
VIEW FUJI D6™ SYSTEM → VISIT EAHINDUSTRIAL.COM → Need help selecting the right turbine stage for modern high-solids coatings? Call 210.822.9393
Related Products
Related Products
Fuji Spray 2049F 6-Foot Flexible Whip Hose
Fuji Spray Products
The Fuji Spray 2049F 6-Foot Flexible Whip Hose is an essential accessory for your painting projects. This high-quality hose features a flexible design, allowing for easy maneuverability and reaching...
2 Qt. Pot - Gasket
Fuji Spray Products
The Fuji 2 Qt. Pot - Gasket is a replacement accessory designed to fit the 2 quart pot perfectly. Crafted with high-quality materials, this gasket ensures a tight seal, preventing any leaks or spills...
Fuji Spray 2-Quart Pressure Pot Assembly Kit
Fuji Spray Products
The Fuji Spray 2-Quart Pressure Pot Assembly Kit is a top-of-the-line product in the Fine Finish Sprayers category. Manufactured by the renowned brand Fuji, this pressure pot assembly kit is designed...