null

Additives, Repair & Stripping Systems

Additives, Repair & Stripping Systems

ADDITIVES Repair & Stripping Systems
This is your “problem-solver” section: performance additives, repair/blend tools, odor control, and professional stripping systems.
Built for repeatable field results — not hobby experimentation.
Finish Additives Repairs & Blend-Outs Strip / Reset / Correct
1) Finish Additives (Flow / Gloss / Leveling / Cure)
Additives used to improve laydown, DOI/gloss clarity, reduce texture, or speed cure — without pushing your reducer past safe limits.
  • Flow & leveling (smoother reflection lines)
  • Orange peel control when conditions aren’t perfect
  • Accelerators for workflow speed (job dependent)
2) Repairs & Blend-Out Tools (Same-Day Fixes)
Repair blenders and edge-management tools designed to soften stop/start lines and tighten up spot repairs without turning tomorrow into a buff-fest.
  • Chip / spot repair blending
  • Halo edge control & feathering
  • Final “show finish” gloss coat help
3) Strip / Reset / Correct (When Prep Must Go Nuclear)
Strippers and correction systems for removing failures, stacked coatings, and unknown jobs — so you can reset the surface and rebuild correctly.
  • Penetration & digestion (not “heat pop”)
  • Use the right pre-prep so it bites deep
  • Best for callbacks, multi-layers, unknown systems
Pro note: If you’re chasing orange peel or dry spray, check atomization first (turbine/PSI, gun setup, distance, overlap). Additives are finish-control tools — not band-aids for underpowered spray equipment.
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Melt Down Urethane Paint Repair Blender No Return Trips

    Melt Down Urethane Paint Repair Blender

    SharkGrip Bathtub Refinishing Coatings

    Melt Down™ Repair Blender & Gloss Enhancer Seamless Chip Repair • Halo Burn-In • No Buffing • No Comebacks Melt Down™ is a professional-grade repair blender and edge-melt additive built for the bathtub, tile, and...
    SKU:
    MD-16
    Availability:
    Usually Ships the same day
    Weight:
    3.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • Scentralock Odor Eliminator - Performance Enhancer SharkGrip Bathtub Refinishing Coatings Scentralock Odor Eliminator - Performance Enhancer

    Scentralock Odor Eliminator - Performance Enhancer

    SharkGrip Coatings

      DO NOT PRE-TREAT — ScentraLock™ must be added at the time of spraying for full odor and VOC suppression performance. ScentraLock™ Odor + VOC Control Additive Designed for solvent-based systems — especially...
    SKU:
    SL-08
    Availability:
    Ships the same day.
    Weight:
    1.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • EZ-FLOW Flow Leveler + Gloss Enhancer A professional additive that helps coatings lay down smoother, improve DOI / gloss clarity, and reduce texture — without “over-thinning” your system. 1/2 Ounce Per Substituted per Tub Mix will yield 250 Tubs

    EZ-Flow Leveler Gloss Enhancer

    SharkGrip Coatings

    EZ-FLOW Flow Leveler + Gloss Enhancer A professional additive that helps coatings lay down smoother, improve DOI / gloss clarity, and reduce texture — without “over-thinning” your system. Flow & Leveling Gloss / DOI...
    SKU:
    EZ-Flow
    Availability:
    Usually Ships the same day.
    Weight:
    8.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • Mako Cold Cure Accelerator Mako Universal Urethane Paint Accelerator

    Mako Universal Urethane Paint Accelerator

    SharkGrip Bathtub Refinishing Coatings

    Cold Cure Accelerator • 2K Urethanes MAKO COLD CURE ACCELERATOR Faster, reliable cures in cold or humid conditions — while protecting gloss, adhesion, and long-term durability. Low-Temp Performance Faster Turnaround Fewer...
    SKU:
    Mako-32
    Availability:
    Ships the same day.
    Weight:
    2.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • True Grit Polycarbonate Crystals True Grit Polycarbonate Crystals

    True Grit Polycarbonate Crystals

    SHARKGRIP Tub & Tile Coatings

    TRUE GRIT / SHARKGRIP COATINGSSlip Resistant Surface (SRS) System Professional-grade polycarbonate crystals designed to create a Slip Resistant Surface (SRS) in bathtub bottoms and wet areas — without compromising appearance or coating integrity...
    SKU:
    TG16
    Availability:
    Ships the Same Day
    Weight:
    1.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • EAH Industrial Spray Equipment Repairs Service Sales Parts SharkStrip Methylene Chloride Alterative Paint Stripper SharkStrip Methylene Chloride Alterative Paint Stripper

    SharkStrip Methylene Chloride Alterative Paint Stripper

    EAH Industrial Spray Equipment Repairs Service Sales Parts

    SHARKSTRIP ® / SHARKGRIP COATINGS Professional Paint Stripper MC-Free Penetration System Professional-grade non-methylene chloride stripping chemistry engineered in-house by SharkGrip Coatings — built through a refinisher’s eyes for...
    SKU:
    TH144-G
    Availability:
    Pending Release Date
    Weight:
    12.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • Includes: 2 OUNCES of each color, Red Oxide, Burnt Umber, Black, and Yellow Oxide Red Oxide adds warmth for Bone and deeper Almond tones

    Tint Kit

    SharkGrip Bathtub Refinishing Coatings

    Small Tint Kit for Bathtub and Sink Refinishing Includes: 2 OUNCES of each color, Red Oxide, Burnt Umber, Black, and Yellow Oxide Designed for professional bathtub and sink refinishers, this compact tint kit lets you fine-tune your coating color for...
    SKU:
    TK
    Availability:
    Ships Same Day on Orders Placed 12 Noon Central Time
    Weight:
    1.00 LBS
    Qty in Cart: 0
    Quantity:
    Subtotal:
  • Total: items /

Adding your products to cart