null
EAH Industrial Spray Equipment Repairs Service Sales Parts

EZ-Flow Leveler Gloss Enhancer

(No reviews yet) Write a Review
SKU:
EZ-Flow
MPN:
EZ-Flow
Condition:
New
Availability:
Usually Ships the same day.
Weight:
8.00 LBS
Width:
6.50 (in)
Height:
10.50 (in)
Depth:
4.50 (in)
  • EZ-Flow Leveler Gloss Enhancer
  • EZ-Flow Leveler Gloss Enhancer
  • EZ-Flow Leveler Gloss Enhancer
Frequently bought together:

Description

EZ-FLOW Flow Leveler + Gloss Enhancer

A professional additive that helps coatings lay down smoother, improve DOI / gloss clarity, and reduce texture — without “over-thinning” your system.

Flow & Leveling
Gloss / DOI Booster
Orange Peel Control
 

Why EZ-FLOW Exists

Most refinishers fight texture by adding more reducer. That can make a coating spray easier, but it also risks runs, weak film build, downgloss, and early failure. EZ-FLOW is built to help your coating flow out and level while keeping your system closer to its intended performance.

Performance Highlights

  • Smoother laydown — reduces dry spray texture and grain
  • Better leveling — helps coatings “melt” together for a more uniform film
  • Improves DOI (distinctness of image) for that deeper, cleaner gloss look
  • Less orange peel when your spray environment isn’t perfect

What It Helps Prevent

  • “Peely” finish that looks cheap under bathroom lighting
  • Over-reduction problems: runs, sags, low build, and downgloss
  • Uneven overlap striping and stop/start dry edges
  • Rework time from sanding and re-shooting texture

Where Bathtub Pros Use It

  • Final gloss coat on tubs when you want a “show finish”
  • Tile walls / surrounds where lighting exposes texture
  • Countertops and vanity tops for higher DOI appearance
  • Repairs / blend-outs where stop-start edges are common

Results You Can See

  • A cleaner reflection line and smoother “wet look” gloss
  • Less nib sanding and less texture correction time
  • More consistent finish across large flat sections and curves

Why EZ-FLOW Beats “Just Add More Reducer”
A quick-look comparison for appearance and film integrity.
Method Texture Control Gloss / DOI Run / Sag Risk Film Build Long-Term Integrity
EZ-FLOW Additive High High Lower (vs over-reducing) Maintained Strong — keeps system closer to spec
Add More Reducer Variable Variable (often downgloss) Higher Reduced Risk — can weaken film if pushed too far
Note: This comparison focuses on achieving a smoother finish while protecting film build. Always follow product labels/SDS and your coating manufacturer’s mix limits.

Simple Professional Use

  1. Mix and reduce your coating as normal for your gun and environment.
  2. Add EZ-FLOW per label dose and mix thoroughly.
  3. Spray your normal pattern — maintain distance, overlap, and speed.
  4. Use on the final gloss coat when you want maximum DOI and smoothness.
  5. Let it flow out — avoid over-working wet coats.
Pro Tip: If you’re chasing orange peel, first check turbine/atomization, gun setup, and distance. EZ-FLOW is the final “finish enhancer” — not a band-aid for low atomization.

Choose EZ-FLOW for a Smoother, Higher-Gloss Finish

Less texture. Better DOI (Distinction of Image). Fewer re-shoots. Built for professional refinishers who want a cleaner finish without over-thinning their system.

(Distinction of Image)

“Sharper reflections”

“Cleaner reflection lines”

“Higher reflection clarity”

“Deeper, smoother gloss”

View AllClose

0 Reviews

View AllClose

Related Products

Related Products