null
SharkGrip Coatings

SharkGrip High Gloss Epoxy

(12 reviews) Write a Review
Transfer to Plastic Jug Service - $15
Transfer to Plastic Jug — $15
Some customers request their coatings repackaged into DOT-labeled fluorinated plastic jugs.

This requires: • Stopping our production line • Specialized containers • DOT-compliant labeling

Benefit: Plastic jugs often ship more efficiently — we can usually pack 4 gallons per box instead of 2, which may reduces your shipping cost.
SKU:
SG1TC
MPN:
SG1TC
Availability:
Usually ships within 24 hours - EAH will contact you by phone or email with shipping details
Weight:
28.00 LBS
Width:
17.00 (in)
Height:
14.00 (in)
Depth:
19.00 (in)
  • SharkGrip High Gloss Epoxy
  • Value Pack
  • SharkGrip High Gloss Epoxy
  • Manual Speck
Frequently bought together:

Description

SHARKGRIP HIGH GLOSS EPOXY
Modified Epoxy for High-Turnover Refinishing

Built for the realities of commercial work — apartments, rentals, and multi-unit turnarounds. This is the epoxy system pros choose when they need speed, durability, and simplicity without sacrificing a glossy, professional finish.

1:1 Easy Mixing
Fast Tack-Up
3–4 Day Pot Life
Low Odor • ISO-Free

The Perfect Solution for High-Turnover Refinishing

At Shark Grip Coatings, we understand the demands of commercial refinishing — especially in high-turnover environments like apartments. Our High Gloss Modified Epoxy is built for speed on-site, dependable results, and fewer headaches for crews that have to keep moving.

Made for Apartment Speed

Designed specifically for fast-paced refinishing jobs in apartments and rental units — fast, durable, and reliable. This system helps you finish clean, pull tape, caulk, and move to the next unit.

Reality check: Speed is profit in multi-unit work.

1:1 Mix Ratio (No Guesswork)

Mix equal parts Part A and Part B. That’s it. No complicated math, no wasted time, and far fewer mixing mistakes when crews are working fast.

Pro tip: Train techs once — the system stays consistent.
Workflow Advantages That Save You Hours
Fast on the wall • Forgiving in the cup • Less waste overall.
Fast Tack-Up Time
  • Pull tape and caulk sooner
  • Keep the job moving
  • Fewer delays between steps
Crew advantage: Less waiting. More units per week.
Extended Pot Life (3–4 Days)
  • Mixed epoxy stays usable longer
  • Less waste between jobs
  • More flexibility for multi-day schedules
Money saver: Waste is profit leaking out of the cup.

Low Odor • ISO-Free

A safer, more comfortable jobsite experience — with no isocyanates in the catalyst and reduced odor. Ideal for occupied buildings, tight hallways, and crews that do this every day.

Immersion Rated & Versatile

Use one coating across many surfaces: tubs, tile, counters, floors — even water-exposed environments. For countertops, manual speckling can help mimic stone finishes.

Note: Performance depends on proper prep, film build, cure, and professional application.

Value That Makes Sense for Commercial Crews

✅ Cost-Effective System
Two gallons each of Part A and Part B, plus reducer — built for volume usage and consistent results. Volume discounts available.
✅ Fast Drying • Long Working Time
Sprays fast on the wall while remaining workable in the cup — a rare combination that helps mobile pros stay efficient.

Trusted by 3,000+ Refinishers Nationwide

Shark Grip Coatings is a leader in commercial refinishing supplies, known for high-performance products and real support. Whether you’re restoring a single tub or turning an entire apartment complex, this Modified Epoxy gives you the edge.

SharkGrip High Gloss Epoxy — Mixing & Induction Instructions
Proper mix ratio, induction, and equipment setup are critical for flow, gloss, and durability.
Exact Mix Ratio (No Guessing)
  • 1 Part Part A (Resin)
  • 1 Part Part B (Catalyst)
  • Mix equal parts by volume.
Important: Mix vigorously until the material is completely uniform and streak-free.
Typical Small Tub Mix
A standard small steel or fiberglass bathtub will typically require:
  • 6 ounces Part A (Resin)
  • 6 ounces Part B (Catalyst)
Thin only as needed based on temperature and spray equipment.
Mandatory Induction Time
After mixing Part A and Part B:
  • Allow the material to induct for 30 minutes.
  • This allows the epoxy system to fully homogenize.
  • Proper induction improves flow, leveling, adhesion, and cure consistency.
With the extended pot life, you can mix upon arrival at the job and set aside while prepping the surface.
Thinning & Spray Equipment Guidance
Add thinner only after induction, immediately before spraying.
  • Thinning requirements depend on temperature, humidity, and airflow.
  • 2–3 stage turbine systems generally require more reducer.
  • 5–6 stage turbine systems require less due to higher air volume and improved atomization.
  • Always spray a test panel when changing equipment or conditions.

Built for Turnarounds. Built for Pros.

Fast tack-up. Easy 1:1 mixing. Long pot life. Glossy results.
The epoxy system that keeps commercial crews moving.

IMMERSION SERVICE vs. SPLASH ZONE — READ THIS
“Immersion-rated” does not mean “immersion-ready tomorrow.”
Blue Label Epoxy is immersion-service rated — but immersion capability is achieved only after full chemical cure (crosslinking), not when it merely feels dry to the touch.
 
? SPLASH ZONE (Tubs & Tile)
Intermittent water exposure that drains after use.
Typical return to service: next day*
? FULL IMMERSION (Pools/Tanks)
Constant submersion + hydrostatic pressure.
Minimum cure before filling: 7 days**
 
Important: Do not confuse an immersion rating with immediate immersion readiness. Cure science governs performance — not label wording.
 
* Next-day splash-zone service assumes correct mix ratio, proper film build, adequate temperature/ventilation, and no standing water.
** Immersion cure time varies with temperature, ventilation, film thickness, reducer selection, and mix accuracy; colder conditions and heavier films extend cure.
View AllClose

Additional Information

Select COLOR and COMPONENT combination below:
** IMPORTANT ** If Ordering PART " B " ONLY - Select NO Color "Part-B" Only
View AllClose

12 Reviews

  • 4

    Epoxy blue label

    Posted by Isaac Alvarado Jr on May 15th 2024

    Good stuff for resurfacing tubs

  • 5

    HIGH GLOSS EXPOXY TOPCOAT

    Posted by TAMIKA BROWN on Mar 13th 2024

    THIS IS EXCELLENT PRODUCT PER OUR RESURFACING TECH'S.

View AllClose

Related Products

Related Products

MEK (Methyl Ethyl Ketone) MEK (Methyl Ethyl Ketone)
Quick view

MEK (Methyl Ethyl Ketone)

EAH Industrial Spray Equipment Repairs Service Sales Parts

MEK (Methyl Ethyl Ketone) is a highly effective solvent available in various sizes (1 Gallon, 5 Gallon Pail, 55 Gallon Drum) suitable for industrial use. Manufactured by EAH Industrial Spray...
Toluene Toluene
Quick view

Toluene

EAH Industrial Spray Equipment Repairs Service Sales Parts

Toluene, a versatile solvent in the SOLVENTS category, is crucial for various industries. EAH Industrial Spray Equipment Repairs Service Sales Parts offers high-quality Toluene in 1 Gallon, 5 Gallon...