Solvents

  SHARKGRIP EPOXY REDUCER(Epoxy Thinner) Premium reducer engineered for SharkGrip High Gloss Epoxy Topcoat and our High Solids High Build Epoxy Primer — two systems built in the ~82% solids class. 82% Solids Reality Gloss + Primer...

  DO NOT PRE-TREAT — ScentraLock™ must be added at the time of spraying for full odor and VOC suppression performance. ScentraLock™ Odor + VOC Control Additive Designed for solvent-based systems — especially...

KLEAN-STRIP® NAKED GUN™ • SPRAY GUN PAINT REMOVER Internal Gun Stripper • Not Reducer • Not Gun Wash Removes cured urethane • epoxy • lacquer • primer • waterborne build-up Your Spray Gun Rescue...

SHARKTHANE PLUS — RED LABEL REDUCER Engineered specifically for SharkThane Plus (Red Label) High-Solids Urethane Systems Not a generic thinner. Not a solvent blend. A purpose-built performance enhancer. SharkThane Plus Red Label Reducer is...

LIQUID PORCELAIN ENAMELREDUCER (LPE) Purpose-built reducer engineered specifically for Liquid Porcelain Enamel systems — for professional spray results. Designed for LPE Flow + Leveling Control Equipment-Dependent Mix Why LPE Reducer...

EZ-FLOW Flow Leveler + Gloss Enhancer A professional additive that helps coatings lay down smoother, improve DOI (Distinction of Image) Step Up Gloss & Clarity, and reduce texture — without “over-thinning” your system. EZ-FLOW...

POLYCHEM ACRASTRIP® 600 B&G MOD FLASH POINT: NONE NON-FLAMMABLE ZERO HAP (as listed) WATER-BASED “GREEN” ALTERNATIVE A purge / flush / cleaning solution engineered for industrial & automotive coatings — built to help...

High solvency - Medium drying thinner for lacquer - 5 gallon pail, 55 gallons Drums " Prices are subject to change according with Oil prices, orders with 5 gal pails and drums are for LTL truck shipments only. FED EX Ground-Home or Air, UPS Ground-Home...

Introducing VM&P Naphtha by EAH Industrial Spray Equipment Repairs Service Sales Parts. This versatile solvent, ideal for thinning oil-based paints and varnishes, cleaning tools, and degreasing surfaces, belongs to the SOLVENTS category. With...

ACETONE: BEST USES IN TUB • TILE • COUNTERTOP REFINISHING SHARKGRIP COATINGS A powerful, clean, VOC-exempt shop solvent when used in the right lane. The simplest way to think about acetone Acetone is not a “universal reducer...

SHARKTHANEQUICK DRY REDUCER Precision-formulated reducer engineered specifically for the SharkThane Quick Dry 4-Hour Cure System. 4-Hour Cure Optimized Stop/Start Blend Control Staged Flash Profile Why I Formulated This Reducer (And Why a...

Slower evaporation rate than Toulene - A solvent for specialty coatings and uses where its use is carefully designated - Medium strength solvent - Moderate evaporation rate - Thins many lacquers, rust inhibitive, rubberized, - marine synthetic enamels,...