null
3M

3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)

(No reviews yet) Write a Review
SKU:
07047
Availability:
Usually ships within 24 hours - EAH will contact you by phone or email with shipping details
Weight:
0.25 LBS
Width:
8.00 (in)
Height:
5.00 (in)
Depth:
0.80 (in)
  • 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)
  • 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)
  • 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)
  • 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)
  • 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)
Frequently bought together:

Description

RESPIRATORY PROTECTION
3M™ Cartridge Selection Guide
Compare the two most common choices for solvent environments: 3M™ 6003 Organic Vapor / Acid Gas vs 3M™ 6001 Organic Vapor. Choose based on what’s in the air — not what “sounds close.”
Fast Selection (Most Common)
Choose 3M™ 6003 (Organic Vapor / Acid Gas)
When you need organic vapor protection plus added protection for acid gases. Best for mixed-chemistry environments and jobs where acid gases may be present.
Choose 3M™ 6001 (Organic Vapor)
When your concern is primarily organic solvent vapors and your SDS/workplace plan does not indicate acid gases.
Critical Reminder
Cartridge choice must match the hazard. If you don’t know what’s in the air, do not guess — review your SDS, workplace safety plan, or contact us for guidance.
Technical Comparison: 6003 vs 6001
Selection Factor 3M™ 6003 – Organic Vapor / Acid Gas 3M™ 6001 – Organic Vapor
Primary Protection Organic vapors + acid gases Organic vapors (solvent vapors)
Typical Use Case Mixed chemical environments where acid gas exposure may occur Paint/coatings solvent work where acid gases are not expected
Compatibility Compatible with many 3M reusable respirators (verify your mask model) Compatible with many 3M reusable respirators (verify your mask model)
Best Practice Add-On Add particulate prefilters if overspray/dust is present (to reduce loading and extend cartridge life) Add particulate prefilters if overspray/dust is present (to reduce loading and extend cartridge life)
Choose This When… You need organic vapor protection and also want coverage for acid gas exposure scenarios You need organic vapor protection only, and your SDS/workplace plan does not indicate acid gases
Product Focus: 3M™ Organic Vapor / Acid Gas Cartridge 6003/07047(AAD)
The 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) is designed to protect against organic vapors and acid gases. This cartridge is compatible with 3M respirators and provides reliable respiratory protection in industrial settings where exposure to harmful vapors and gases may occur. Manufactured by 3M, the 6003 cartridge is designed for a comfortable and secure fit, supporting extended wear in work environments where protection is required.
Safety Notes & Limitations (Read Before Use)
  • Match the cartridge to the hazard: Confirm contaminants via SDS and workplace safety plan.
  • Not for oxygen-deficient environments: Air-purifying cartridges require adequate oxygen.
  • Not for unknown concentrations: If exposure is unknown, do not guess.
  • Seal & fit matter: Poor face seal (hair, incorrect size, worn straps) reduces protection.
  • Change-out schedule: Replace per workplace guidance, exposure level, and breakthrough—don’t overrun cartridges.
  • Add prefilters when needed: Overspray/dust can load quickly—prefilters help extend service life.
Breakthrough warning: If you smell vapors while wearing the respirator, leave the area and check fit and cartridge condition immediately. Odor breakthrough can indicate saturation, incorrect selection, or an incomplete seal.
Need Help Choosing Between 6003 and 6001?
Tell us what you’re doing and what chemicals you’re using. We’ll help confirm the right cartridge type and any recommended prefilters for overspray and dust environments.
Always follow manufacturer instructions and workplace safety requirements. This guide is informational and does not replace an industrial hygiene assessment.
View AllClose

0 Reviews

View AllClose