Additives -Stripping Systems
This is the professional refinisher’s problem-solver section. Performance additives, repair and blend chemistry, odor-control technology, and professional stripping systems designed to maintain finish quality, correct field problems, and improve spray conditions when the job demands more control.
Real-world refinishing rarely happens under perfect conditions. Temperature, humidity, atomization, airflow, and jobsite sensitivity all affect coating behavior. These chemistry tools give professionals more precise control over finish quality, repair workflow, spray comfort, and full-system correction.
Additives and specialty chemistry should refine a system, improve conditions, and solve real field problems — not compensate for poor prep or underpowered spray equipment.
1 Finish Control Additives
Additives designed to improve flow, leveling, gloss clarity, DOI, and cure behavior without pushing reducers beyond safe limits.
Best for: smoother laydown, tighter reflection lines, improved finish control, and cleaner final appearance.
2 Repair & Blend Systems
Repair blenders and edge-management chemistry used for chip repair, halo control, feathering, and same-day spot blends so repairs disappear instead of turning into tomorrow’s buff-out job.
Best for: stop/start lines, edge melt, cosmetic touchups, and tighter repair transitions.
3 Strip • Reset • Surface Correction
Professional coating removal systems designed to break down failed finishes, stacked coatings, and unknown systems so the surface can be rebuilt correctly from the ground up.
Best for: callbacks, multi-layer failures, unknown coatings, and jobs that must be reset instead of patched.
4 Odor & VOC Control Additives
Advanced additives like ScentraLock™ are designed to reduce harsh spray odor, suppress VOC release, and support cleaner-feeling applications during spray and early cure in solvent-based systems.
Best for: apartments, hotels, hospitals, condos, occupied spaces, and any odor-sensitive refinishing environment.
Pro note: Odor-control additives can improve jobsite comfort and reduce lingering spray harshness, but proper PPE, respirators, and ventilation are still required when spraying solvent coatings.
Tap to Call: 210-822-9393- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Melt Down Urethane Paint Repair Blender
SharkGrip Bathtub Refinishing Coatings
Melt Down™ Repair Blender & Gloss Enhancer Seamless Chip Repair • Halo Burn-In • No Buffing • No Comebacks Melt Down™ is a professional-grade repair blender and edge-melt additive built for the bathtub, tile, and...- SKU:
- MD-16
- Availability:
- Usually Ships the same day
- Weight:
- 3.00 LBS
-
Scentralock Odor Eliminator - Performance Enhancer
SharkGrip Coatings
DO NOT PRE-TREAT — ScentraLock™ must be added at the time of spraying for full odor and VOC suppression performance. ScentraLock™ Odor + VOC Control Additive Designed for solvent-based systems — especially...- SKU:
- SL-08
- Availability:
- Ships the same day.
- Weight:
- 1.00 LBS
-
Fast Fleck - Accelerator
SharkGrip Coatings
FAST FLECK ACCELERATOR™ Moisture Scavenger + Particle Control Additive for MULTISPEC® Multi-Color Fleck Same-Day Workflow Faster Dry-to-Sand Flatter Laydown Professional-use additive for faster MULTISPEC® fleck workflows...- SKU:
- FF-1
- Availability:
- Usually Ships Sames Day
- Weight:
- 11.00 LBS
-
NAKED GUN® NON-METHYLENE CHLORIDE SPRAY GUN PAINT REMOVER
KLEEN STRIP
NAKED GUN® • PROFESSIONAL SPRAY GUN CLEANER / PAINT REMOVER Internal Gun Stripper • Not Reducer • Not Gun Wash Removes cured urethane • epoxy • lacquer • primer • waterborne build-up Two Ways to Rescue a...- Availability:
- Usually Ships in 24 Hours.
- Weight:
- 10.00 LBS
-
EZ-Flow Leveler Gloss Enhancer
SharkGrip Coatings
EZ-FLOW Flow Leveler + Gloss Enhancer A professional additive that helps coatings lay down smoother, improve DOI (Distinction of Image) Step Up Gloss & Clarity, and reduce texture — without “over-thinning” your system. EZ-FLOW...- SKU:
- EZ-Flow
- Availability:
- Usually Ships the same day.
- Weight:
- 8.00 LBS
-
Mako Universal Urethane Paint Accelerator
SharkGrip Bathtub Refinishing Coatings
Cold Cure Accelerator • 2K Urethanes MAKO COLD CURE ACCELERATOR Faster, reliable cures in cold or humid conditions — while protecting gloss, adhesion, and long-term durability. Low-Temp Performance Faster Turnaround Fewer...- SKU:
- Mako-32
- Availability:
- Ships the same day.
- Weight:
- 2.00 LBS
-
AcraStrip 600 B/G EPA rated green gun soak cleaner
POLYCHEM
POLYCHEM ACRASTRIP® 600 B&G MOD FLASH POINT: NONE NON-FLAMMABLE ZERO HAP (as listed) WATER-BASED “GREEN” ALTERNATIVE A purge / flush / cleaning solution engineered for industrial & automotive coatings — built to help...- SKU:
- 600-1
- Availability:
- Usually Ships in 24 Hours.
- Weight:
- 10.00 LBS
-
True Grit Polycarbonate Crystals
SHARKGRIP Tub & Tile Coatings
TRUE GRIT / SHARKGRIP COATINGSSlip Resistant Surface (SRS) System Professional-grade polycarbonate crystals designed to create a Slip Resistant Surface (SRS) in bathtub bottoms and wet areas — without compromising appearance or coating integrity...- SKU:
- TG16
- Availability:
- Ships the Same Day
- Weight:
- 1.00 LBS
-
SharkStrip Methylene Chloride Alterative Paint Stripper
EAH Industrial Spray Equipment Repairs Service Sales Parts
SHARKSTRIP ® / SHARKGRIP COATINGS Professional Paint Stripper MC-Free Penetration System Professional-grade non-methylene chloride stripping chemistry engineered in-house by SharkGrip Coatings built for the coating stacks you actually see in the...- SKU:
- TH144-G
- Availability:
- Pending Release Date
- Weight:
- 12.00 LBS
-
Tint Kit
SharkGrip Bathtub Refinishing Coatings
Small Tint Kit for Bathtub and Sink Refinishing Includes: 2 OUNCES of each color, Red Oxide, Burnt Umber, Black, and Yellow Oxide Designed for professional bathtub and sink refinishers, this compact tint kit lets you fine-tune your coating color for...- SKU:
- TK
- Availability:
- Ships Same Day on Orders Placed 12 Noon Central Time
- Weight:
- 1.00 LBS