Primers
Professional refinishing systems should be organized by layer position, not by habit. Some jobs need molecular bonding, some need structural film build, some need adhesion bridging, and some require substrate correction before the coating system can even begin.
A refinishing system is built in layers. The right bonding or primer layer can determine whether the topcoat performs for years or fails early from poor adhesion, improper build, or an uncorrected substrate problem.
Build the system in the right order. Molecular bonding, structural priming, adhesion promotion, and correction layers each serve a different purpose — and confusing them leads to failures.
1 Bonding / Coupling Layer
Silane-based wipe-on bonding agents engineered to create covalent molecular adhesion between hard mineral substrates and topcoats without adding unnecessary film build.
Purpose: Molecular bond to porcelain, ceramic, and other properly prepared dense substrates.
2 Structural Epoxy Primer Layer
Modified polyamide epoxy primer systems designed to provide structural adhesion, encapsulation, and long-term immersion durability where a true foundation layer is required.
Purpose: Foundation layer for full-stack refinishing systems.
3 Adhesion Promoters for Plastics & Composites
Solvent-borne bridge chemistry engineered for ABS, fiberglass, cultured marble, laminates, and other non-porous substrates where mechanical adhesion alone is not enough.
Purpose: Create an adhesion bridge before primer or topcoat application.
4 Corrosion Stabilization Layer
Acid-modified or non-reactive stabilization primers formulated to neutralize, seal, and isolate rusted or compromised metal before building the remainder of the coating system.
Purpose: Substrate correction before primer or topcoat application.
Need help choosing the right layer? Tell us what surface you are working on, what condition it is in, and what coating system you plan to use, and we will help you build the correct primer and bonding sequence.
Tap to Call: 210-822-9393- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
High Solids High Build Epoxy Primer
SharkGrip Bathtub Refinishing Coatings
SHARKGRIP EPOXY HIGH BUILD PRIMERModified Epoxy Primer — Flat-Drying, High-Solids, High-Fill This is the primer version of our SharkGrip Modified Epoxy system — engineered to dry flat like a true primer while delivering serious build and a...- SKU:
- SG1P
- Availability:
- Usually ships Same Day
- Weight:
- 22.00 LBS
- Select COLOR and COMPONENT combination below:
- IF ORDERING PART " B " ONLY - Select " NO COLOR