null
Fuji Spray Products

Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun

(No reviews yet) Write a Review
SKU:
4106-GXPC
MPN:
4106-GXPC
Condition:
New
Availability:
Usually Ships the same day.
Weight:
47.00 LBS
Width:
18.00 (in)
Height:
16.00 (in)
Depth:
16.00 (in)
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
  • Fuji Spray Products Fuji D6™ 6-Stage HVLP Spray System with G-XPC Spray Gun
Frequently bought together:

Description

ENGINEERED FOR PROFESSIONAL HIGH-SOLIDS FINISHING
Fuji D6™ 6-Stage HVLP Spray System
With G-XPC Spray Gun • 11.5 PSI • Minimal-to-NO Thinning
HIGH-SOLIDS READY
11.5 PSI POWER
MINIMAL / NO THINNING
BATHTUB REFINISHER FAVORITE
WHO THIS IS FOR
  • Bathtub & tile refinishers spraying high-solids / low-VOC coatings
  • Cabinet & wood finishers spraying Chemcraft, CV, WB, primers
  • Pros tired of fighting orange peel, over-reduction, and rework
BOTTOM LINE
High solids require AIR POWER — not extra solvent.
The D6 helps you spray coatings closer to intended viscosity for smoother finish quality.
THE “NO THINNING” ADVANTAGE
When you don’t have to over-thin to make a turbine work, you protect:
  • Gloss + DOI
  • Film build + durability
  • Adhesion + chemical resistance
  • Consistency job-to-job
Pro rule: Use power to atomize — don’t use solvent to compensate.

6 FOR 6 — Six Bonus Items Worth $200+ Included Inside
Built to make you faster, cleaner, and more consistent from Day One.
Fuji D6 6 for 6 bonus pack
Bonus Items Included
  • 1.8mm Air Cap Set
  • 19pc Spray Gun Cleaning Kit
  • Wet Film Gauge
  • “Always Measure” Booklet
  • 6ft Flexible Whip Hose
  • D6 Filter Pack
WHY THIS MATTERS
Wet Film Gauge + “Always Measure”
Controls your build so your results are repeatable — tubs or cabinets.
Whip Hose
Less fatigue. More control. Cleaner passes.
Note: Bonus contents may vary by packaged promotion. Contact us if you need confirmation for a job quote.

Bathtub Refinishing Reality: High-Solids + Low VOC Needs Real Turbine Power
This is where 2–4 stage units start costing you money.
What underpowered turbines cause
  • Orange peel from weak atomization
  • Too much reducer (performance damage)
  • Gloss loss, pinholes, blushing risk
  • Extra sanding, extra coats, extra time
Why the D6 fixes it
  • 11.5 PSI supports true high-solids atomization
  • Spray closer to intended viscosity (less solvent)
  • More consistent finish quality + fewer callbacks
  • Better control on edges, curves, and vertical surfaces
Pro insight: Low-VOC, high-solids coatings are thicker by design.
The solution is not “more reducer.” It’s a turbine platform that can atomize the coating correctly.

Cabinet & Wood Finishing: When You Spray Chemcraft / Akzo-Type Systems, You Need Control + Consistency
Primers, waterbornes, CV, lacquers — the D6 gives you the range.
Wood finishes that benefit
  • Chemcraft / Akzo systems
  • Waterborne clears and pigmented coatings
  • High-build primers (where turbines usually struggle)
  • Conversion varnish and lacquer work
Why pros like the D6
  • Dial power to match material + nozzle set
  • Cleaner fan pattern and less texture
  • More predictable build coat behavior
  • Fewer defects = fewer sand-backs

Fuji D6 Key Features (Built for High-Solids Pros)
6-Stage Motor • 11.5 PSI
Fuji D6 motor
Delivers exceptional power so you can atomize virtually all coatings undiluted or with minimal reduction — for even coverage and a professional finish.
Refinisher advantage: less “orange peel roulette.”
Smart Select Control Panel
Fuji D6 Smart Select control panel
Expertly calibrated for easy one-touch operation. Dial in air power quickly when switching between clearcoats, primers, waterbornes, or thicker high-solids materials.
Shop + field friendly: faster setup, more repeatable results.
Easy Pause Remote (Up to 75 ft.)
Fuji D6 Easy Pause Remote
Pause the turbine remotely to minimize interruptions and keep work flowing — especially useful on cabinetry runs, doors, and multi-step refinishing jobs.
Efficiency win: less walking, less stop/start chaos.
Cool Operation + Fold-Away Gun Holder
Cool Operation Design: proprietary bleeder box technology helps keep operating temps cooler, supporting motor longevity without sacrificing performance.
Fold Away Spray Gun Holder: holds your gun securely during pauses and storage — then collapses onto the turbine when it’s time to spray.
Real-world benefit: less mess, less damage, more uptime.

Want the right needle/aircap + setup for YOUR coatings?
We support bathtub refinishers and cabinet finishers daily — and we’ll help you dial this system in.
? TAP NOW — Ask for Seth Martin • 210.822.9393
(Mobile-friendly tap-to-call button)

Why Buy Your D6 From EAH Industrial?
Because you’re not just buying a box — you’re buying results.
  • Refinisher-first guidance (high-solids / low-VOC reality, not generic “HVLP talk”)
  • Coatings expertise across bathtub, tile, and cabinet finishing
  • Chemcraft / Akzo wood finishing support + SharkGrip refinishing systems
  • Real technical help on aircap sizing, reduction strategy, and defect prevention
If you’re spraying high-solids regularly: a 6-stage turbine isn’t a luxury — it’s the tool that keeps you profitable.
View AllClose

Additional Information

Turbine Stages:
6 Stage
Brand:
Fuji
View AllClose

0 Reviews

View AllClose

Related Products

Related Products