Description

SWAT Solvent Wipe All Traces

Name: SWAT Solvent Wipe All Traces - Final Wipe
Brand: SharkGrip Bathtub Refinishing Coatings
SKU: SWAT-128
Availability: OutOfStock
Rating: 5 (3 reviews)

Final-step solvent wipe for professional surface prep — designed to remove what “standard solvent wipes” leave behind.

Silicone Digester

Moisture Scavenger

Residue-Free Prep

Why SWAT Exists

Most “solvent wipes” move dirt around. SWAT is built to pull contaminants out and help create a dry, bond-ready substrate before sanding, silanes, primers, or topcoats.

Performance Highlights

Removes hidden residues standard wipes commonly leave behind
Attacks silicone oils, waxes, polishes, and “mystery grime”
Kinetic drying action helps pull moisture from porous areas & grout lines
Cleaner sanding — reduces grinding contaminants into the surface

What It Prevents

Fisheyes & repellency from silicone residue
Blushing / haze from trapped moisture and contaminants
Adhesion failures caused by poor wetting
“Looks good today / fails later” callbacks

Where Pros Use It

Bathtubs, tile walls, soap dishes & silicone cut-lines
Countertops (porcelain, ceramic, composites)
Cabinets & greasy kitchens (pre-mask / pre-primer)
Fiberglass, cultured marble, ABS & other composites

Results You Can See

Often shows up on the rag as “extra” contamination after standard wiping
Helps coatings and primers wet out more consistently
Supports stronger bonding performance for silanes and primers

How SWAT Stacks Up: A Side-by-Side Comparison

For the “Final Wipe” step — designed to leave a clean, dry, bond-ready surface.

Solvent	Cleaning Power	Moisture Scavenging	Residue-Free Performance	Substrate Compatibility	Dwell Time / Penetration	Silicone, Soap Scum, Wax
SWAT	High	Excellent	Yes – Leaves zero residue	Broad – Tailored for refinishing	Optimized for deep penetration and controlled evaporation	Excellent – Dissolves all contaminants
Acetone	Moderate	Poor	No – Can leave contaminants	Limited – Not ideal for porous surfaces	Dries too fast, locking moisture in	Poor – Not effective on stubborn residues
Denatured Alcohol	Moderate	Poor	No – Leaves residues behind	Limited – Can be harsh on some substrates	Evaporates rapidly with insufficient cleaning time	Poor – Leaves residues behind
MEK	High	Poor	Moderate – May leave trace residues	Moderate – Caution on delicate surfaces	Fast evaporation can compromise deep cleaning	Moderate – Partial removal
Toluene	Moderate	Poor	No – Residues remain	Limited – Can affect finish quality	Does not provide adequate dwell time for penetration	Poor – Not effective on stubborn residues
Lacquer Thinner	Moderate	Poor	No – Often leaves glycol ether residues	Limited – Not recommended for moisture-prone surfaces	Inadequate penetration due to fast evaporation	Poor – Leaves glycol residues
Xylene	Moderate	Poor	No – Ineffective residue removal	Limited – Not versatile for refinishing	Fails to address hidden moisture	Poor – Not effective on stubborn residues

Note: This comparison is focused on the final wipe step prior to sanding/silanes/primers/topcoats. Always follow product labels/SDS and local safety requirements.

Simple Professional Use

Cut / remove heavy silicone first where applicable.
Apply SWAT (spray or saturated rag). Wipe in one direction.
Flip to a clean side of the rag often — don’t re-deposit contamination.
Let surface flash off to a clean, dry feel.
Proceed with sanding / silane wipe / primer per your system.

Pro Tip: If you sand over residue, you grind contamination into the surface. SWAT is designed to help prevent that. Always, Clean and degrease before sanding.

Choose SWAT for a Clean, Dry, Bond-Ready Substrate

Not a gimmick. A true surface-prep advantage — built for professional refinishers who want fewer problems and stronger bonds.

▶ Watch a SWAT field testimonial

View AllClose

3 Reviews

5
Swat

Posted by CORY BEDORD on Sep 11th 2025

I’ve used many different products to remove adhesives and silicone. Everything from M.E.K, Goof Off, and lacquer thinner, to rubbing alcohol and mineral spirits. Everything I could find. Nothing compares to swat. I love using it for my final wipe down before spraying because I know it’s going to work. Highly recommend this product.
5
SWAT

Posted by JOHNNY YARBROUGH on Mar 15th 2025

Received my sample of swat this morning. Went to a vacant job I had lined up the soap residue melted off and not only cleaned away with ease but was so clean it squeaked after I let dry for about 6 minutes. This tub was fiberglass had been refinished before. The customer just wanted a refinish No stripping. Did not flash the feathered edges up. I ran a small amount around the tile and my tape stuck extremely good when I masked the tub off. Great product! A little goes a long way.
5
SWAT

Posted by Nina Calderazzo on Mar 14th 2025

As a professional in bathtub refinishing, I rely on high-quality products to ensure a flawless finish, and SWAT Solvent Wipe has become an essential part of my process. This slow-evaporating solvent is highly effective at removing tough residues, including silicone, oils, dirt, and grease, which can interfere with adhesion and final results. What sets SWAT apart is its controlled evaporation rate, giving me enough working time to thoroughly clean surfaces without it flashing off too quickly. Unlike some harsher solvents, it doesn’t leave behind a chalky or streaky residue, which is crucial for a smooth, professional-grade refinish. I also appreciate that it’s powerful without being overly aggressive on most surfaces, making it a reliable choice for prepping tubs, tile, and other refinishing projects. If you're in the refinishing business and need a dependable cleaner for surface prep, SWAT is a must-have in your toolkit. Highly recommended!